GATE ASTER V2 Basic Module

GATE ASTER V2 Basic Module
GATE ASTER V2 Basic Module
GATE ASTER V2 Basic Module
GATE ASTER V2 Basic Module

Available in various types!

Article codeHA-AST2-BM
€ 82.50 64.95 *Prices include VAT
GATE ASTER V2 Basic Module

A computer controlled mosfet full of functions and sensors! Top of the line!

The ASTER is currently available in three firmware editions: BASIC, ADVANCED & EXPERT.

BASIC: The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED.
ADVANCED: The best for those who like complex solutions. Advanced version with wide variety of functions. It enables access to the Statistics and ASTER World Rankings.
EXPERT: The best for the most experience airsofters. The Expert version has all functions with maximum configuration options!
With the new Trigger sensor generation it is possible to use 3-15 sensitivity levels on the first milimeter of trigger movement. Depending on the trigger construction, it enables even 250 possible sensitivity settings. You do not have to disassemble your AEG. Just use the Tactical Programming Card or the GATE Control Station™ App to adjust the trigger to your preferences and level of skills.
Two selector sensors allow you to use up to six fire selector modes, including innovative SEMI-BURST-AUTO mode:

(Only Advance firmware)
216 modes, all variations of:

(Only Expert firmware)
343 modes, all variations of:

*BINARY: fires one shot Vuurt 1 schot on the trigger pull and another shot upon release.
*SEMI RAMPING: If you pull the trigger very fast, it switches to AUTO mode
*SEMI-BURST-AUTO (SAFE mode is switching from: SAFE-SEMI-SAFE)
Thanks to the gear sensor, ASTER precisely detects in which position the cycle should finish. Therefore, even the shortest trigger action produces at least one full cycle.
Thanks to the cycle detection function you get:
Automatic BURST – there is no need to set the burst time. You can set the burst between two and 10 shots;
Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually. You can simply set the pre-cocking as high, mid or low;
FULL CYCLE - when the pre-cocking is off, ASTER ensures that the gearbox completes a full cycle. You gain a higher reliability.
PRE-COCKING (Gen.1.5) (Only Advance firmware)
Victory in the game is often a matter of fractions of seconds. Thanks to PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger response significantly.
AUTO MODE – the spring is automatically compressed after each shot,
And three PRE-COCKING BOOST options: HIGH / MID / LOW

*Now the pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually
Please note: using PRE-COCKING increases wear and tear on the gearbox.
THe Magazine function simulates your high cap to real/low capacity magazine. When your simulated low cap is empty you need to wait x seconds before you can shoot again. This increases the realism when playing with high/midcaps.

(Only Advanced & Expert firmware)
Low ammo warning
The burst enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps.

This enables a reduction in a gun's rate of fire. You use stronger LiPo batteries, and still have a ROF just like in a real gun.

BASIC firmware: 6 Power settings
ADVANCED firmware: 6 Power en 6 Delay settings
EXPERT firmware: Power: 10-100%, Delay: 5-1000ms of adaptive 1-100 RPS
SNIPER DELAY (Only Advance firmware)
It lets you to set delay between each SEMI shots to simulate the delay from reload or recoil. You can set 0.2, 0.5, 1, 2 or 3 seconds delay.

(Only Expert firmware)
You can set the delay to 0.01 - 5 seconds.

We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response. It works with the ROF Control System. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full ROF, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery.

*Works only when ROF STAB is ON.
Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, it will not allow firing.

*ASTER detects the number of cells automatically. There is no need to reprogram ASTER every time you replace the battery.
When the battery voltage drops to a predefined level, the motor will vibrate at regular intervals.  
We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery against damage.
It automatically adjusts the motor's braking power according to your needs. This prolongs the lifespan of the motor.

Equalizer (Only Advanced & Expert firmware)
The function Equalizer enables dynamic trigger point, which allows you to shoot even faster.

Off: normal way of firing
LVL 2: to fire a next shot, it is enough to release the trigger by ~40% of trigger movement
LVL 1: to fire a next shot, it is enough to release the trigger by ~20% of trigger movement
1-100% adjustable (EXPERT firmware only)
Do you want to achieve a higher ROF and faster trigger response? Are you planning a power upgrade of your gun? In that case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher ROF of the gun and a faster trigger response.
Built-In Self-Test
This allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.
Thanks to its special conformal coating, our product is resistant to atmospheric conditions (Military Specification MIL-V-173C).

Printed Quickstart
Make your adventure start more easily with a new product. The quickstart contains basic information and hints.

Custom Vibrations (Only EXPERT firmware)

Notification Settings (Only EXPERT firmware)
Enable/disable notifications & warning vibrations

User Profiles (Only EXPERT firmware)

*The system operating voltage is: 3 - 17V
*Maximum Lipo voltage: 11.1V
*Easy programable!
*Very easy to mount!
*Super extensive settings!
*Full protection
*Innovative optic sensors, for enhanced durability!
*Warning Basic firmware!
*Firmware upgrade possible Click here!

For more technical information, Click Here!

*You can not return this product if the seal is broken

This article is available in various models

GATE ASTER V2 Basic Module - Rear

Out of stock M1-F6 AST2-BMR
€ 82.50 € 64.95

GATE ASTER V2 Basic Module - Front

Available M1-F6 AST2-BMF
€ 82.50 € 64.95

Other customers also bought:

GATE Buttstock Extension Cable

GATE Buttstock Extension Cable

€ 7.90
GATE TITAN V2 Basic Module

GATE TITAN V2 Basic Module

€ 105.00
GATE TITAN V2 Advance Set

GATE TITAN V2 Advance Set

€ 164.90